Katalog produktów
BT2956.01 42°
Charakterystyka
Multipurpose milling cutter with 42° entering angle that decreases cutting forces and allows a quick feed in a limited capacity machine. Every insert pocket is checked point by point to improve the insert life. The insert thickness is 4,76 mm and Torx screws allow a good chip evacuation.
Zastosowanie
This face milling cutter works well on steels, stainless steel, alloyed steels, cast iron and aluminium alloys.
| BT2956.01 42° | Ilość płytek | D | L | d | I3 | a | Rozmiar płytek | Waga |  |
|
|---|---|---|---|---|---|---|---|---|---|---|
| Ref. | BT2956.01-040 | 4 | 40 | 40 | 16 | 20 | 5 | ODM..0404.. | 0,3 |
315,17 PLN dodaj do koszyka |
| BT2956.01-050 | 4 | 50 | 40 | 22 | 22 | 5 | ODM..0404.. | 0,4 |
320,88 PLN dodaj do koszyka |
|
| BT2956.01-063 | 5 | 63 | 50 | 25 | 25 | 5 | ODM..0404.. | 0,7 |
380,46 PLN dodaj do koszyka |
|
| BT2956.01-080 | 6 | 80 | 50 | 26 | 26 | 5 | ODM..0404.. | 1,2 |
493,81 PLN dodaj do koszyka |
|
| BT2956.01-100 | 7 | 100 | 50 | 29 | 29 | 5 | ODM..0404.. | 1,9 |
633,14 PLN dodaj do koszyka |
|
| BT2956.01-125 | 7 | 125 | 63 | 29 | 29 | 5 | ODM..0404.. | 3,6 |
836,68 PLN dodaj do koszyka |
|
| BT2956.01-160 | 8 | 160 | 63 | 29 | 29 | 5 | ODM..0404.. | 4,7 |
1 057,45 PLN dodaj do koszyka |
|
| BT2956.01-200 | 10 | 200 | 63 | 40 | 40 | 5 | ODM..0404.. | 8,2 |
1 352,40 PLN dodaj do koszyka |
|