Katalog produktów
BT1231.11
Charakterystyka
Positive milling cutter with 90° entering angle that uses standard triangular inserts. The clamp system allows a quick insert assembly and dismantling. Milling cutter with short cylindric shank.
Zastosowanie
This face and square milling cutter works well on steels, alloyed steels, stainless steel and refractory casts. This general milling cutter for diversified manufacture is recommended for conventional milling machines and machining centers. Economical milling cutter that allows to use TPUN inserts and TPKN inserts.
| BT1231.11 | Ilość płytek | D | L | L2 | d | a | Rozmiar płytek | Waga |  |
|
|---|---|---|---|---|---|---|---|---|---|---|
| Ref. | BT1231.11-012 | 1 | 12 | 100 | 30 | 16 | 9 | TP..1102.. | 0,2 |
160,00 PLN dodaj do koszyka |
| BT1231.11-014 | 1 | 14 | 100 | 30 | 16 | 9 | TP..1102.. | 0,2 |
160,00 PLN dodaj do koszyka |
|
| BT1231.11-016 | 1 | 16 | 110 | 35 | 20 | 9 | TP..1102.. | 0,2 |
160,00 PLN dodaj do koszyka |
|
| BT1231.11-018 | 1 | 18 | 110 | 35 | 20 | 9 | TP..1102.. | 0,3 |
165,00 PLN dodaj do koszyka |
|
| BT1231.11-020 | 2 | 20 | 110 | 35 | 20 | 9 | TP..1102.. | 0,3 |
185,00 PLN dodaj do koszyka |
|
| BT1231.11-022 | 2 | 22 | 110 | 35 | 20 | 9 | TP..1102.. | 0,3 |
185,00 PLN dodaj do koszyka |
|
| BT1231.11-025 | 2 | 25 | 110 | 35 | 25 | 9 | TP..1102.. | 0,4 |
210,00 PLN dodaj do koszyka |
|
| BT1231.11-032 | 3 | 32 | 125 | 35 | 32 | 9 | TP..1102.. | 0,8 |
220,00 PLN dodaj do koszyka |
|
| BT1231.11-040 | 4 | 40 | 125 | 35 | 32 | 9 | TP..1102.. | 0,8 |
351,00 PLN dodaj do koszyka |
|